“Phew, I’ve not gained anything!” Aren’t you relieved when your bathroom scale shows that? But in actuality, your scale doesn’t directly measure your weight. Instead, the load cell built into it converts the weight force into a path. In many industrial applications, bending beams and shear beams are often used for such measurements.

## How Is Weight Measured?

Be it a bathroom scale, a finely calibrated laboratory balance, or the gravimetric level monitor of a silo, these measuring instruments determine mass. As a rule, they measure the weight force that’s occurring. But unlike, for example, a beam balance or a spring balance, the load cells used for this determine the weight force indirectly. For this purpose, these force transducers convert the weight force into a path.

Here’s the principle: In a load cell, the weight force deforms a built-in spring or a bending beam. The intensity of this deformation then gives information about your weight – or, more precisely, about your weight force – in the case of your bathroom scale. And with that information, it also answers the question of whether you can order a dessert or should start thinking about a diet!

## The “Core” of Bending Beams and Shear Beams

The different design stages of force transducers in weighing technology: shear beam, bending beam, single-point and S force transducer.

How can you determine how far the measuring bodies of a bending beam or shear beam load cell deform? At this point, special strain gauges or thin-film sensors come into play. These are attached to or mounted in the measuring bodies. In the measurement process, they act as a mechanical intermediate stage.

Example of strain gauges: These are glued to the measuring body. If the measuring body deforms, this is transferred to the strain gauges. These convert the elastic deformations proportionally into electrical signals. Such changes in resistance can be easily and very accurately measured: with a measurement accuracy of between 0.01% and 0.05% Fnom. The calibration is made in grams, kilograms, or tons.

As an alternative to these glued foil strain gauges, there are force transducers with welded-in thin-film sensors. This is a technology that the WIKA Group excels in and for which, in the field of force measurement, is the only supplier on the market. The thin-film technology offers consistently high quality, an exact measurement directly in the force flow, very good temperature characteristics, and high long-term stability. With bending beams and shear beams, the standardized sensor is welded into the measuring element using a laser, which enables automated series production.

## Application Fields for Bending Beams and Shear Beams

Bending beams and shear beams are used in weighing technology to determine the weight of small and medium-size vessels, and are also frequently used in force measurement. The agricultural industry, for example, frequently uses load cells for weighing livestock, when dosing animal feedstock, in gravimetric level monitoring of vessels and silos, and for weighing straw or hay bales directly in the baling press.

But beyond these fields of application, bending beams and shear beams can be used in a wide variety of other ways:

• Platform weighing (platform scales)
• Weighing in process and dosing systems
• Vessel scales, crane scales, and truck scales

Bending beams and shear beams are also often installed for applications in the building materials industry, the chemical industry, the food industry, and medical technology.

## Practical Example: Level Monitoring with Bending Beam or Shear Beam Load Cells

Bending beams and steam beams can check fill levels by measuring the weight of the vessel and its contents. The filling height of a vessel or tank can be calculated from the measured data of this gravimetric level monitoring. This measurement method offers a number of advantages:

• The level and the exact mass can be measured at the same time.
• Access to the tank or vessel is not required, thus eliminating contact with the medium.
• The measurement is independent of the material, its properties, and the geometry of the container.
• The bending beam or shear beam can be easily replaced, if necessary.

In level measurement, the load cells must function regardless of the nature and condition of the media: liquid or solid, aggressive or mild, conductive or non-conductive, foaming or dust, steaming or icy, hot or cold, small or large grain sizes. The cells must also operate well regardless of the geometry of the vessel and whether the vessel medium is evenly or unevenly distributed. Such factors must not affect the measuring result or the permanent function. This also applies in temperature-critical applications and where robustness and high durability are required, such as in the steel industry.

Shear beams and bending beams in the agricultural industry

In the agricultural industry, stainless steel bending beams for weighing are very much in demand. When planting or fertilizing, for example, a lot of money can be saved through the exact distribution of the seeds or fertilizer. The basis for this, as is always the case with automation, is exact measured values. That’s why high-precision shear beams, which are also insensitive to side loads, are ideal.

## Bending Beams, Shear Beams and Other Load Cells: Versatile Problem Solvers

Bending and shear beams are among the most commonly used load cells. Depending on the field of application, there are other force transducers that can be used. WIKA designs and manufactures load cells designed for ranges between 0.3 kg (0.66 lb.) and 300 tons.

• Single point load cells. These are used in weighing technology for platform scales with smaller and medium sizes. Also referred to as “single points,” they are equally suitable for eccentric load introductions.
• Compression force load cells. Just like heavy-duty load cells, compression force load cells are tailored for weighing medium and large vessels and silos. The force introduction is as easy as the installation. Furthermore, the design is robust.
• Tension/compression force load cells. These are used mainly for weighing suspended loads. Measurement is made directly in the force path. In addition, installation is uncomplicated.

Further information on the product range for force measurement, such as the Model F3833 bending beam and the Model F3831 shear beam, can be found on the WIKA USA website.